HORIZONTAL FINGER JOINT
FAH-F1
Horizontal finger joint system
(single chain type)
Single chain type is specialized to produce Horizontal finger joint system. The output utilities can reach 120 pieces per minute. It is the best choice for customers who need Horizontal finger joint.
FAH-F2
Horizontal finger joint system
(double chain type)
Double chains horizontal shaping system can be finger joint shaper and for shaping of different length boards, customized according to different working length of customer request. Standard models can be processed within the 2M.
| MODEL | F1 | F2 | |
| Specification / Configuration | 150 mm ~ 1000 mm | 250 mm ~ 2000 mm | |
| Working length | 25 mm ~150mm | 25 mm ~205mm | |
| Working width | 17 mm ~ 60 mm | ||
| Working thickness | – | ||
| Vertical type capacity 25 x 60 x 400 | – | ||
| Horizontal type capacity 22 x 50 x 350 | – | ||
| Shaper’s table width | 15 KW | ||
| Power of finger spindle | 11.25 KW / S | ||
| Power of cut-off saw | 1.5 KW | ||
| Power of scoring saw | Inverter 7.5KW | ||
| Power of table movement | 90 ~ 120 / min | 60 / min | |
| Shaper max. cycle speed | Single liquid type injection spreader | ||
| Glue spreader type | – | ||
| Shaper wood cutting monitoring device | · | ||
| Shaper abnormal detection system | – | ||
| Pneumatic high – speed solenoid valve | o | ||
| Safety fence device | 6.2 M | ||
| Finger assembler working length | 5.625 KW | ||
| Power of feeding inverter | 7.5 KW | ||
| Power of hydraulic pump | 3.75 KW | ||
| Power of cut-off saw | 9 | ||
| Assembler max. working cycle | · | ||
| Auto cut-length setting device | · | ||
| Assembler abnormal detection system | · | ||
| 6.5M chain type pre-joint feeding system | · | ||
| Servo fully auto flipper device | · | ||
| Infinite finger joint assembler machine | – | ||
| *All specification and design characteristics shown in this catalogue are subject to change without prior notice | |||
- = Standard / o(—) = Optional / – = No configuration / F = Fully automatic configuration /
- H = Configure the pre-joint system / B = Configure rear feeding conveyor system /
- C = Simple Conveyor Configuration / 2L = Double finger assembler configuration
Related Products
-
AUTO PLANER MODEL RH-AN932
MODEL RH-AN-932 Table area 813x1000mm Max. planning width 813mm Max. planning thickness 300mm Min. planning…
-
DOUBLE SIDE PLANER MODEL RH-635ARD
MODEL RH-635ARD Maximum width of plane 635mm(25″) Maximum thickness of plane 200mm(8″) Minimum thickness of…
-
AUTO PLANER MODEL RH-20
MODEL RH-20 Maximum planning width 508MM(20”) Maximum planning thickness 180mm Minimum planning thickness 1.5mm Number…
-
OPTIMIZING CUT OFF PUSH
SC-303 OPTIMIZING CUT OFF MACHINE-PUSH TYPE A profitable performer for safe, high speed and high…
