HORIZONTAL FINGER JOINT
FAH-F1
Horizontal finger joint system
(single chain type)
Single chain type is specialized to produce Horizontal finger joint system. The output utilities can reach 120 pieces per minute. It is the best choice for customers who need Horizontal finger joint.
FAH-F2
Horizontal finger joint system
(double chain type)
Double chains horizontal shaping system can be finger joint shaper and for shaping of different length boards, customized according to different working length of customer request. Standard models can be processed within the 2M.
| MODEL | F1 | F2 | |
| Specification / Configuration | 150 mm ~ 1000 mm | 250 mm ~ 2000 mm | |
| Working length | 25 mm ~150mm | 25 mm ~205mm | |
| Working width | 17 mm ~ 60 mm | ||
| Working thickness | – | ||
| Vertical type capacity 25 x 60 x 400 | – | ||
| Horizontal type capacity 22 x 50 x 350 | – | ||
| Shaper’s table width | 15 KW | ||
| Power of finger spindle | 11.25 KW / S | ||
| Power of cut-off saw | 1.5 KW | ||
| Power of scoring saw | Inverter 7.5KW | ||
| Power of table movement | 90 ~ 120 / min | 60 / min | |
| Shaper max. cycle speed | Single liquid type injection spreader | ||
| Glue spreader type | – | ||
| Shaper wood cutting monitoring device | · | ||
| Shaper abnormal detection system | – | ||
| Pneumatic high – speed solenoid valve | o | ||
| Safety fence device | 6.2 M | ||
| Finger assembler working length | 5.625 KW | ||
| Power of feeding inverter | 7.5 KW | ||
| Power of hydraulic pump | 3.75 KW | ||
| Power of cut-off saw | 9 | ||
| Assembler max. working cycle | · | ||
| Auto cut-length setting device | · | ||
| Assembler abnormal detection system | · | ||
| 6.5M chain type pre-joint feeding system | · | ||
| Servo fully auto flipper device | · | ||
| Infinite finger joint assembler machine | – | ||
| *All specification and design characteristics shown in this catalogue are subject to change without prior notice | |||
- = Standard / o(—) = Optional / – = No configuration / F = Fully automatic configuration /
- H = Configure the pre-joint system / B = Configure rear feeding conveyor system /
- C = Simple Conveyor Configuration / 2L = Double finger assembler configuration
Related Products
-
SINGLE STRAIGHT RS-366
RS-366 STRAIGHT LINE RIP SAW Integrating glue jointing application and trimming for your choice. A…
-
AUTOMATIC CUT-OFF SAW
1.Designed and built for fast cut operations, up to 81 cuts per minute. 2.Speed can…
-
HAND JOINTER MODEL RH-916
MODEL RH-AN-916J Table area 406x2300mm Spindle speed 5300RPM Spindle diameter 100mm Cutterhead motor 5HP Knives…
-
OPTIMIZING CUT OFF PUSH
SC-303 OPTIMIZING CUT OFF MACHINE-PUSH TYPE A profitable performer for safe, high speed and high…
